Текст страницы
EN Connecting with Dreamehome App
Note:
This product works with the Dreamehome app which can be used to control
your device.
• Only 2.4GHz Wi-Fi is supported.
1. Download the Dreamehome App
• Due to upgrades in the app software, the actual operations may differ
from the directions in this manual. Please follow the instructions based on
the current app version.
Scan the QR code on the robot, or search for "Dreamehome" in the app store to
download and install the app.
3. Reset Wi-Fi
Simultaneously press and hold the and buttons until you hear a
voice prompt say, "Waiting for the network configuration." Once the Wi-Fi
indicator is blinking slowly, the Wi-Fi has been successfully reset.
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and
add the device again.
QR Code
2. Add Device
Open the Dreamehome App, tap "
" in the upper right corner, and scan
the QR code above again to add "DreameBot L10 Prime". Please follow the
prompts to finish the Wi-Fi connection.
Wi-Fi Indicator
· Blinking slowly: To be
connected
· Blinking quickly: Connecting
· On: Connected
9