Текст страницы
EN How to Use
Fast Mapping
Do Not Disturb (DND) Mode
After configuring the network for the first time, follow the instructions on the
app to quickly create a map. The robot will start mapping without cleaning.
When the robot returns to the base station, the mapping process has been
completed and the map will be saved automatically.
When the robot is set to the Do Not Disturb (DND) mode, the robot will be
prevented from resuming cleaning and the power indicator will go out. The
DND mode is disabled by default at the factory. You can use the app to enable
the DND mode or modify the DND period. The DND period is 22:00-8:00 by
default.
Turn On/Off
Note:
· The scheduled cleaning tasks will be performed on time during the DND
period.
· The robot will resume cleanup where it left off after the DND period expires.
Press and hold the
button for 3 seconds to turn on the robot. The power
indicator should be illuminated. Place the robot onto the base, the robot
should turn on automatically and begin charging. To turn off the robot, move
the robot away from the base and press and hold the
button for 3 seconds.
Spot Cleaning
Pause/Sleep
When the robot is on standby, briefly press the button to enable spot
cleaning mode. In this mode, the robot will clean a square-shaped area of
1.5 × 1.5 meters around it and return to its starting point once spot cleaning is
completed.
When the robot is running, press any button to pause it.
If the robot is paused for more than 10 minutes, it automatically enters sleep
mode. The power indicator and charging indicator will turn off. Press any
button on the robot or base, or use the app to wake up the robot.
Robot Restarting
Note:
· The robot will turn off automatically if it is left in sleep mode for more than
If the robot stops responding or cannot be turned off, press and hold the
button for 10 seconds to force a shutdown. Press and hold the button for 3
seconds to turn the robot back on.
12 hours.
· If the robot is paused and placed onto the base station, the current
cleaning process will end.
10