Текст страницы
EN EN Preparing Your Home
Before Use
1. Place the Base Station and Connect to an Electrical Outlet
2. Install the Ramp Extension Plate
Place the base station in a location that is as open as possible with
a good Wi-Fi signal. Leave enough space as shown in the figure and
remove any objects in the shaded area. Insert the power cord into the
base station and plug it into the socket.
Before cleaning, place a physical barrier at the edge of the stairs to ensure
the secure and smooth operations of the robot.
＞5 cm
Before cleaning, please move away unstable, fragile, valuable or dangerous
items, and clean up cables, cloths, toys, hard objects and sharp objects on
the ground to avoid being entangled, scratched or knocked over by the robot
and causing losses.
＞5 cm
Washboard Filter
＞1 m
Note: Ensure the washboard filter is installed into place.
I : ON
O : OFF
Firmly insert the power cord
upwards until the indicator
turns on.
Open the door of the room to be cleaned, and put the furniture in its proper
place to leave more space.
To prevent the robot from missing areas that need to be cleaned, do not
stand in front of the robot, threshold, hallway, or narrow places.
Note:
Note:
· Make sure that no objects might block the signaling area.
· To prevent water stains from wetting wood floors or carpets, placing the
base station on tile floors or marble floors is recommended.
· When operating the robot for the first time, follow it around while cleaning to remove any potential obstacles in time.
· The LED auxiliary light will provide auxiliary lighting in dimly lit environments.
· Do not vacuum hard objects like stones, steel balls and toy parts, or sharp objects like construction waste, broken glass and nails, otherwise the ground may be scratched.
11
12