Текст страницы
Disassembly and Assembly
Back Cover Press
Appropriate tool for pressing depends on the parts repaired.
Using the roller and stamp
Keep your hands out of the roller and stamp.
• Be sure to swipe while the spring of the roller and stamp is pressed.
• As the back cover can be damaged by excessive force, be careful not to damage the back cover.
• Be sure to place the surface of the roller and stamp horizontally on the back cover.
If you have repaired a single back cover, or if you have disassembled and
assembled the back cover to repair the battery, you can use the bundled roller and
stamp to press the back cover further.
1 With the roller’s spring pressed, use the press roller to rub the edges of the back
cover 5 times from bottom to top. Repeat this 5 times at all edges of the back cover
so that the back cover is pressed well.