Текст страницы
en Before using for the first time
3. Use a WAF 17 wrench to tighten
the lock nuts against the housing
until they are hand-tight.
4.6 Aligning the appliance
In order to reduce noise and vibra-
tion and to prevent the appliance
from moving, align the appliance cor-
rectly.
1. Use a WAF 17 wrench to loosen
the lock nuts in a clockwise direc-
tion.
In doing so, hold the foot tight and
do not adjust its height.
Before using for the first time5 Before using for the
first time
2. To align the appliance, turn the ap-
Prepare the appliance for use.
pliance feet. Check that the appli-
ance is level using a spirit level.
5.1 Starting an empty washing
cycle
Your appliance was inspected thor-
oughly before leaving the factory. To
remove any residual water, run the
first wash cycle without any laundry.
1. Select the Cottons 90° pro-
gramme or the drum cleaning pro-
gramme in the Home Connect
app.
2. Close the door.
3. Pull out the detergent drawer.
All appliance feet must stand firmly
on the ground.
14