Текст страницы
Cleaning and servicing en
16.2 Changing the basic set-
tings
If a software update is available, you
can find further information in the
Home Connect app.
1. To call up the basic settings, press
and hold both buttons 3 sec. for
approximately 3 seconds.
The display shows .
2. Use the programme selector to se-
lect the required basic setting.
Page 30
3. Adjust the basic setting:
To change the value, press
1
2
3
4
5
6
7
8
Ready in.
To reset the appliance to the
factory settings, press and hold
Programme selector with programme po-
sitions
Start/Reload for ap-
prox. 3 seconds.
Press
Start/Reload to start
the Drum Clean.
4. To exit the basic settings, press
any button except for Ready in
or
Start/Reload.
Cleaning and servicing17 Cleaning and servi-
cing
17.1 Cleaning the drum
Clean the drum if you have carried
out 20 washing cycles at a temperat-
ure of 40 °C or lower, if flashes, or
if you have not used the appliance
for a prolonged period, but at least
once a year.
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Set the volume of the signal at
the end of the programme:
A: 0 (off) to A: 4 (very loud)
Set the volume of the signal
tone emitted when the buttons
are pressed:
b: 0 (off) to b: 4 (very loud)
Set the display brightness:
C: 1 (low) to C: 4 (very high)
Start the programme for clean-
ing and caring for the drum
(dc).
Activate (d:on) or deactivate
(d:oFF) the reminder to clean
the drum.
Activate (E:on) or deactivate
(E:oFF) the crease-reduction
function.
Once the programme has
ended, the drum moves the
laundry at regular intervals to
prevent creasing.
Display the number of finished
programmes (PC).
Restore the appliance to the
factory settings (rES).
Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
every operation with the door
31