Текст страницы
Types of drainage hookups
Standpipe
Attach the drain hose to the
elbow (no supplied, available from
our Customer Service Department).
Position the elbow on the drain hose
4" (100 mm) from end of the hose as
shown. Insert this section of the drain
hose into the drain pipe, If the hose is
pushed down too far, this may cause the washer to self-syphonie continuously
empty as it is filling. Secure the elbow and hose with a cable tie to keep the hose
from coming out of the drain pipe during use.
Sink siphon
Secure the drain hose to the sink siphon
using a ø0.9-1.6 in. (20-44 mm) hose clip
(available from a hardware store).
Wash Basin
WARNING: scalding. When washing at high temperatures, there is a risk of
scalding if you touch hot suds, e.g. when pumping out hot suds into a wash basin.
Do not reach into the hot suds.
Notice: appliance damage / damage to textiles. If the end of the drain hose
touches the discharged water (water drained from washer), it (the discharged
water) can be sucked back into the washer and may damage the appliance
or textiles.
Make sure that:
- there is no stopper in the sink drain;
- the end of the drain hose does touch the discharge water;
- the sink drain is free flowing and not partially clogged;
- attach the drain hose securely to the wash basin.
Do not twist, pull out or bend the drain hose.
Secure the drain hose with the cable tie to the drain pipe,
wash basin, etc., so the hose does not pull out from the
force of the water.
62