Текст страницы
AUTOMATIC WASHING MACHINE
INSTALLATION AND CONNECTION
Before using the washing machine, make sure that the electricity, water supply and
sewerage meet the stated requirements. If this is not the case, call a qualified technician
and plumber.
ATTENTION! Before installing the appliance, make sure that the washing
machine, as well as the water supply and drain hoses and the power cord were not
damaged during delivery and installation. If there are any defects, do not install or
use the washing machine, it can be dangerous.
REMOVING THE TRANSPORT BOLTS
ATTENTION! Before using the washing machine, the transport bolts must be
removed.
Follow these steps to remove the bolts:
1. Loosen the four transport bolts with a wrench.
2. Grasp the head of the bolt and pull it through the hole. Repeat this action for each
bolt.
3. Close the holes with the supplied plastic plugs.
4. Save the transport bolts for use during possible transport of the machine.
ADJUSTING THE LEVEL OF THE WASHING MACHINE
To eliminate vibration, set the washing machine level. If necessary, adjust the height
of the legs to compensate for the unevenness of the floor by tilting it slightly and turning
the legs.
1
2
3
4
Increase slope
Reduce slope
1. Check for the feet on the washing machine. Place the machine on a level strictly
horizontally on a flat and solid floor.
33
USER GUIDE