Текст страницы
2. If the ozone treatment function is selected independently, it will be cancelled
automatically before any other program is started.
SETTING THE DOWN-PADDED COAT DRYING PROGRAM
To wash a down-padded coat use the “Wash+Dry” program. Select the “DOWN
COAT” and the “AUTOMATIC DRYNG” (AUTO) modes. Do not use the “Drying” program
for down coat drying. It is recommended to only dry a down coat once for a
better drying effect.
NOTE:
– No water is used in the ozone treatment mode and the drum does not rotate.
– The function is only used for refreshing and deodorizing white and light-
colored clothes.
– Before selecting this function, please ensure that the clothes have no surface
finishes that easily oxidize and fade, as well as no inscriptions or patterns
applied by ink printing.
– This function is not available in certain washing programs.
LAUNDRY COMPLETION DELAY
Press and hold the “Stains” button for 3 seconds to set the program completion
time (delay) which is selectable at an increment of 1 hour up to a maximum of 24
hours. After selecting the desired program, but prior to pressing the START/PAUSE
button, repeatedly press the button until the desired delay time appears on the
display, e.g. 8 hours; the mode indicator will appear on the display.
NOTE: The washing cycle time will be included in the set program completion
delay time.
In order to cancel the function, select a different washing program. The delay
indicator will go out.
SAFETY PRECAUTIONS FOR THE DRYING PROGRAM:
– If the clothes contain too much moisture, the machine will automatically
extend the drying time; this is normal, the drying time will continue to be
displayed: «0:20».
– The water supply valve should be open during the drying program, as water is
required for cooling and drying during the drying process.
– The maximum drying time is set differently for each model.
– In order to prevent wrinkling of the clothes, caused by excessive drying, you
can set a shorter drying time first, and then extend it in accordance with the
drying effect.
– It is recommended to run the tumble-drying cycle first before starting the
drying program.
– Untie any knots on the clothes after tumble-drying and then put them back
into the drum for drying.
– Drying may be uneven in some areas for large and thick clothing items. Please
extend the drying time after completion of the first cycle depending on the
results.
– Woolen clothes are not suitable for drying.
– Do not dry clothes that easily warp or shrink.
NOTE: This function is not available in certain washing programs.
ATTENTION! The actual time of a washing cycle completion delay may differ
from the set delay time, depending on the water supply pressure, drainage type,
clothing type, water temperature and other factors.
NOTE: This function is not available in certain washing programs.
PROGRAM TIME ADJUSTMENT
Press the “+” or “-“ buttons to adjust program duration. The correction value
will be shown on the numeric display and the washing machine will operate in
accordance with the set program time.
NOTE: This function is not available in certain washing programs.
SMART – ONE-TOUCH WASH
In the “Smart” mode the machine measures the weight of the laundry and
automatically selects the time and temperature required for washing.
“AUTO” will appear on the display during the detection stage after program
startup.
When the appliance is off or on, but no program is running, press and hold the
START/PAUSE button for at least 3 seconds; the machine will launch the Smart
washing mode immediately.
DRYING
1. WASH+DRY PROGRAM SELECTION METHODS
Select the washing program by pressing the relevant button, then add the drying
function to the washing program by pressing the “Drying” button. The program
and function indicators will light up. Select the value corresponding to the
desired drying time (AUTO-30-60-90-120-150-180-210-240 (minutes) or “--» to
disable the function) by briefly pressing the “Drying” button.
– Automatic drying: the drying time can be automatically adjusted depending on
the quantity and humidity of the clothes. When automatic drying is selected
the AUTO value will light up on the display.
– Drying time selection: select the desired drying time (30-60-90-120-150-180-
210-240) by pressing the “Drying” button. The selected time will appear on
the display.
Press the START/PAUSE button; the WASH+DRY program will start, the drying
process will automatically start upon completion of the washing cycle.
TO DISABLE THE DRYING MODE:
1. Press the “Drying” button; «--» will appear on the display, the drying function
will be disabled.
2. Select a different washing program to automatically cancel the drying
function.
DRUM / DRYING CHANNEL CLEANING
1. After machine startup press the DRUM CLEANING button to enter the program.
2. After machine startup and before starting any program, press and hold the
DRUM CLEANING button for 3 seconds and the program will go to the “Drying
Channel Cleaning” option. The program run time will appear on the display
(0:05). After startup a program for the removal of the lint accumulating in the
drying channel will be run to improve drying efficiency. In this mode, press
and hold the “Drum Cleaning” button for 3 seconds to exit the “Drying Channel
Cleaning” mode and enter the “Drum Cleaning” program, the run time of the
“Drum Cleaning” program will appear on the display.
SELECTING THE “DRYING” PROGRAM
An independent drying program is provided to enable drying only, without
starting the washing program.
NOTE: Please do not place any clothes or detergents into the drum when the
“Drum Cleaning” and “Drying Channel Cleaning” programs are in progress.
NOTE: The drying function is suitable for drying cotton clothes. Do not dry items
that warp and shrink easily.
ADDING CLOTHES DURING PROGRAM OPERATION
When the program is running, press and hold the START/PAUSE button to suspend
machine operation. The lock indicator will go out; you can now open the door and
add or remove clothes. After adding or removing clothes, close the door, and
press and hold the START/PAUSE button again; the machine will resume operation
from the position in which it was stopped.
Press the “Drying” button in the program selection area during the washing
process to directly select the independent drying program.
Within the independent drying program the automatic drying mode or the desired
drying time can be selected by briefly pressing the “Drying” button.
After selecting the drying mode press the START/PAUSE button to start the
independent drying program.
ATTENTION! If the water level or temperature is too high the door lock indicator
is on and the door cannot be opened; in this case you will not be able to add or
remove clothes during machine operation.
46