Текст страницы
(Translation from original instructions) GB
PRODUCT DESCRIPTION
This device is a direct current (DC) inverter generator suitable for MIG / MAG / MOG welding, MMA and TIG LIFT electrodes.
Thanks to the inverter technology that allows high performance while maintaining reduced dimensions and weight, the welder is portable and easy to handle.
Through the front panel it is possible to adjust the welding parameters and in the MIG function the adjustment is made in a synergic way.
The welding machine has a protection circuit against overvoltage, overcurrent and overheating. When the voltage, output current and temperature of the
machine exceeds the standard, the welding machine will automatically stop working.
INSTALLATION
Installation must be carried out by qualified personnel in compliance with IEC 60974-9 and national and local regulations. The machine must be lifted by
means of the handle positioned on the top of the product. This operation must be carried out with the machine switched off and with the welding cables
disconnected. The supply voltage must correspond to the voltage indicated on the rating plate of the technical data positioned on the product. Use the machine on
a system whose power and protection characteristics (fuse and / or differential) are compatible with the current required for operation, for further details see the
data shown on the plate affixed to the machine.
This welding machine is for professional use only and is reserved for the industry.
Operation
Layout for the front and rear panel:
1. MIG GUN Connect.
2. Output anode: When TIG mode, this polarity must connect the work piece
3. TIG gun control connector.
4. TIG GAS Connector
5. Output cathode：When MIG mode, this polarity must connect the work piece
6. Wire feeder switch & spool Gun switch: up for spool Gun and down for Wire feeder.
9