Текст страницы
Dirty Water Tank
1.When dirty water reaches the Max line,
• Before self-cleaning cycle, please clean
the DWT and ensure the water level in the
CWT>40%.
EN
Brush Roller Cover
1.Squeeze latches on the cover and pull upward
the appliance will stop working and show
a reminder on the display and play a voice
prompt.
2.Pull up the tank lid to empty the DWT. Use
to remove.
Fig.D-8
2.Rinse with water.
the cleaning tool to remove remaining debris.
Rinse the inside of the DWT and place back
into the appliance.
Fig.D-4
Fig.D-9
3.While replacing, always latch the brush cover
Dry Filter & Waste Separator
into place to avoid leakage.
Fig.D-10
Brush Roller
1.Remove the brush roller by grabbing the
Grasp recessed area on each side of the dry
filter and pull upward. Rinse under running
water and must be completely dry before
recombining with the lid of the DWT.
* A spare dry filter is provided with your
appliance for convenient replacement.
brush roller tab and pulling out.
Fig.D-11
2.Use the cleaning tool to remove the hair and
Fig.D-5
debris wrapped around the roller and then
rinse the roller with water. Replace the brush
roller back into the accessory holder, and
allow it to dry completely before reinstalling.
Fig.D-12
3.Remove hair and debris from the brush roller
The waste separator can be removed and
rinsed under the running water.
* The function of the waste separator is to
separate solid waste.
* The appliance can function normally without
the waste separator, so users can decide
whether to keep it or not.
Fig.D-6
chamber and the opening with a tissue or a
damp cloth.
Fig.D-13
4.Replace the brush roller by inserting the brush
Brush Roller Self-cleaning
1.Place the appliance on the charging dock
roller end into the right side of the holder,
then attach the roller tab to the magnetic
buckle on the left side to lock into place.
Fig.D-14
after use, the sensor will auto-detect the level
of dirt.
2.When you hear the voice prompt “please
begin self-cleaning cycle,” press the self-
cleaning button and begin the process.
3.Once complete, you will hear the voice
Note:
• A spare brush roller is provided with your
appliance for convenient replacement.
• To maintain optimal performance, replace the
brush roller every 6 months.
prompt “self-cleaning completed, please
clean the Dirty Water Tank.” At this point, the
appliance will begin charging.
Fig.D-7
Note:
• Ensure the charging dock is plugged in and
the battery level>10%.
13