Текст страницы
Power tool use and care
1. Do not force the power tool. Use the
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of
electric shock.
5. When operating a power tool outdoors,
correct power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
2. Do not use the power tool if the switch
use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
6. If operating a power tool in a damp
does not turn it on and off. Any power
tool that cannot be controlled with the switch is
dangerous and must be repaired.
3. Disconnect the plug from the
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
Personal safety
1. Stay alert, watch what you are doing
power source and/or remove the
battery pack, if detachable, from
the power tool before making any
adjustments,changing accessories,
or storing power tools. Such preventive
safety measures reduce the risk of starting the
power tool accidentally.
4. Store idle power tools out of the reach
and use common sense when operating
a power tool. Do not use a power
tool while you are tired or under
the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
2. Use personal protective equipment.
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
5. Maintain power tools and accessories.
Always wear eye protection. Protective
equipment such as a dust mask, non-skid safety
shoes, hard hat or hearing protection used for
appropriate conditions will reduce personal
injuries.
3. Prevent unintentional starting. Ensure
Check for misalignment or binding of
moving parts, breakage of parts and
any other condition that may affect the
power tool’s operation. If damaged,
have the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
6. Keep cutting tools sharp and clean.
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool.Carrying power tools with your finger on
the switch or energising power tools that have
the switch on invites accidents.
4. Remove any adjusting key or wrench
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
7. Use the power tool, accessories and
before turning the power tool on. A
wrench or a key left attached to a rotating part of
the power tool may result in personal injury.
5. Do not overreach. Keep proper footing
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
8. Keep handles and grasping surfaces
and balance at all times. This enables
better control of the power tool in unexpected
situations.
6. Dress properly. Do not wear loose
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not
allow for safe handling and control of the tool in
unexpected situations.
clothing or jewellery. Keep your hair and
clothing away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
7. If devices are provided for the
Service
1. Have your power tool serviced by a
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of dust
collection can reduce dust-related hazards.
8. Do not let familiarity gained from
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Additional safety instructions for grinders,
disc-type polishers and disctype sanders
frequent use of tools allow you to
become complacent and ignore tool
safety principles. A careless action can
cause severe injury within a fraction of a second.
EN
4