Текст страницы
IRONING MODES
REMEMBER TO FILL WATER INTO IRON. WE RECOMEND DISTILLED
WATER FOR BEST IRONING EFFECT!
1. Make sure iron is unplugged and the fabric select dial (J) is in the MIN
position.
2. Turn dry/steam selector to ''0'' (C) .
3. Place iron on the heel rest, tilt forward approximately 45 angle and pour
water into the water-filling cover to the MAX position of the water tank.
1. DRY IRONING
1. Set the dry/steam selector (C) to position ''O''
2. As per washing label of various clothes, set the correct ironing
temperature (J) to begin a ironing.
2. STEAM IRONING
1. Fill in the water with water tank as per the water-filling methods.
2. Plug the appliance in the socket.
3. Set Fabric Select Dial (J) to MAX position as per the temperature indicator,
steam iron will be available, otherwise water may leak from the soleplate.
4. When power indicator light (H) goes off, you are ready to iron!
5. Set the Dry/Steam Selector (C) correctly, increase steam output by
pushing the Dry/Steam Selector right and decrease steam output by left.
3. STEAM BURST
•
This function works well for tough wrinkles and heavy fabrics. By
pressing Steam Button (A), an intense burst of steam is emitted from the
soleplate, this can be very useful when removing stubborn creases.
•
The shot of steam facility can be used only while ironing with high ironing
temperature. For optimal result, there should be 5 seconds rest between
presses of the steam button.
•
To prevent leaking water from the soleplate does not press the steam
button continuously for more than 5 seconds.. Also allow at least one
minute interval before applying this burst of steam function.
4. SPRAY FUNCTION
At any temperature by pressing the spray button (B) a couple of times, the
laundry can be damped down. Ensure that there is enough water in the water
tank.
7