Текст страницы
ENGLISH
IRON VT-8359
The iron is intended for ironing clothes, bedding and for
vertical steaming of fabrics.
DESCRIPTION
1. Water spray
2. Water inlet lid
3. “Continuous steam supply/self-clean” switch
4. Burst of steam button
5. Water spray button
6. Handle
7. Heating element ON/OFF indicator
8. Power cord protection
9. Iron base
10. Water tank
11. Control button
12. Maximum water level mark
13. Iron soleplate
14. Beaker
15. Power indicator
16. LED temperature selection indicator
ATTENTION!
For additional protection it is reasonable to install a
residual current device (RCD) with nominal operation
current not exceeding 30 mA, to install RCD, contact
a specialist.
SAFETY MEASURES
Before using the electrical unit, read this instruction
manual carefully and keep it for future reference.
Use the unit for its intended purpose only, as speci
fied in this manual. Mishandling the unit may lead to its
breakdown, injury to the user and cause harm to the
user or damage to his/her property.
••
Do not switch the unit on in places where aerosols
are sprayed or highly flammable liquids are used.
••
To avoid damaging the soleplate be very careful
when ironing clothes with metal zippers or buttons.
••
Make sure that the power cord is not on the iron
ing board and it doesn’t touch hot surfaces and
sharp edges.
••
Never leave the unit connected to the mains unat
tended. During breaks in operation and when the
iron is cooling down, put the iron on the base (in a
vertical position).
••
Before plugging/unplugging the iron, set the tem
perature control knob to the minimum position and
switch the continuous steam supply off.
••
Always unplug the iron if you are not using it.
••
The plug of the power cord must be removed from
the socket before the water tank is filled with water.
••
The water inlet lid should be closed during ironing.
Do not open the water inlet during the iron opera
tion.
••
To unplug the iron, always hold the power plug,
never pull the power cord.
••
To avoid electric shock, do not immerse the iron,
the power cord and the plug into water or any other
liquids.
••
Before taking the iron away, let it cool down com
pletely and pour out the remaining water.
••
Pour out water from the water tank only after
unplugging the iron.
••
Clean the unit regularly.
••
Do not touch the unit body and the power plug with
wet hands.
••
Do not allow children to touch the iron body and the
power cord during operation.
••
Do not leave children unattended to avoid them
using the unit as a toy.
••
For children safety reasons do not leave polyethyl
ene bags, used as packaging, unattended.
Attention! Do not allow children to play with polyethyl
ene bags or packaging film. Danger of suffocation!
••
Before switching the unit on, make sure that your
home mains voltage corresponds to the unit oper
ating voltage.
••
The power cord is equipped with a Euro-plug; insert
it into a socket that has a reliable grounding con
nection.
••
To avoid fire, do not use adapters for plugging the
unit in.
••
To avoid mains overloading, provide that no other
electrical appliances with higher power consump
tion are connected to the same outlet.
••
Do not use the iron outdoors and in places with
high humidity.
••
Place the iron on a flat stable surface or use a sta
ble ironing board.
••
Do not leave the iron connected to the mains unat
tended.
ATTENTION! The surfaces of the iron get hot during
operation. Keep open skin areas away from iron hot
surfaces or outgoing steam to avoid burns.
••
Never steam or iron clothes on a person.
••
Do not fill the water tank with scented liquids, vin
egar, starch solution, descaling reagents, chemi
cals etc.
••
This unit is not intended for usage by children. Place
the unit out of reach of children during operation
and cooling down.
••
The unit is not intended to be used by people
with physical, sensory or mental disabilities (includ
ing children) or by persons lacking experience or
knowledge if they are not under supervision of a
person who is responsible for their safety or if they
are not instructed by this person on the usage of
the unit.
••
Do not use the unit if the power cord or the power
plug is damaged. If the power cord is damaged, it
should be replaced by the manufacturer, service or
similar qualified personnel to avoid danger.
••
Do not use the iron after it was dropped, if there is
visible evidence of damage or if the iron is leaking.
••
Do not attempt to repair the unit. Do not disas
semble the unit by yourself, if any malfunction is
detected or after it was dropped, unplug the unit
9