Текст страницы
ENGLISH
••
When the iron soleplate (13) reaches the set tem
perature, the indicator (7) will go out. The indi
cator of the selected temperature (16) will light
constantly, you can start ironing.
Notes: If you are ironing at high temperature but
you need to switch to lower temperature, it is rec
ommended to wait until the soleplate temperature
decreases and start ironing only after the indicator (7)
starts flashing.
WATER SPRAY
••
You can dampen the fabric by pressing the water
spray button (5) several times.
••
Make sure that there is enough water in the water
tank (10).
••
It is permissible to use the water spray button (5)
at any temperature both during ironing with steam
and for dry ironing.
DRY IRONING
••
This table is only valid for smooth materials. Fabrics
of other types (crimped, raised, etc.) are best
ironed at low temperature.
••
Sort items by ironing temperature first: synthetics
to synthetics, wool to wool, cotton to cotton etc.
••
The iron heats up faster than it cools down. For this
reason, it is recommended to iron the items which
require low temperature first (for instance, synthetic
fabrics). After that, start ironing at higher tempera
ture (silk/wool). Cotton and linen items should be
ironed last.
••
If an item is made of mixed fabrics, the iron should
be set to the lowest temperature (for instance, if
an item is 60% polyester and 40% cotton, it should
be ironed at temperature used for polyester iron
ing «•»).
••
If you cannot define the fabric structure, find a spot
that is inconspicuous when the item is being worn
and select the ironing temperature experimentally
(always start with the lowest temperature and raise
it gradually until you get the desired result).
••
Corduroy and other fabrics that become glossy
quickly should be ironed strictly in one direction (in
the direction of the pile) with slight pressure.
••
To avoid appearance of glossy spots on synthetic
and silk fabrics, iron them backside.
«all Textile» program
This program sets the appropriate temperature, which
is suitable for all fabrics that can be ironed, and pre
vents damage to clothes due to the choice of an inap
propriate temperature. The «all textile» program is not
intended for fabrics that cannot be ironed.
For more information, see the clothes care label.
••
Place the iron on its base (9).
••
Insert the power plug into the mains socket.
••
Set the continuous steam supply knob (3) to the
position
– the steam supply is off.
••
Press and hold the control button (11) to switch the
iron on.
••
Press the control button (11) sequentially to set the
desired ironing temperature «МАХ», «•••», «••»,
«•», «all Textile» (depending on the type of fabric).
At the same time, the temperature indicator (16)
and the heating indicator (7) will light up and start
flashing simultaneously.
••
When the temperature of the iron soleplate (13)
reaches the set temperature, the indicator (7) goes
out, and the temperature selection indicator (16)
lights constantly, you can start ironing.
••
After using the iron, press and hold the control but
ton (11) to switch off.
••
Pull the power plug out of the mains socket and let
the iron cool down completely.
STEAM IRONING
While steam ironing, it is necessary to set the ironing
temperature «•••» or «МАХ», it is recommended to
set «МАХ».
••
Press and hold the control button (11) to switch the
iron on.
••
To select the mode, press the control button (11)
sequentially until the corresponding «all Textile»
mode LED indicator lights up on the indicator (16).
••
The iron will switch to heating mode. At the same
time, the heating light indicator (7) and the temper
ature mode indicator (16) will be flashing.
••
When the required temperature is reached, the heat
ing indicator (7) will go out, and the «all Textile»
indicator on the display (16) lights constantly, you
can start ironing.
SETTING THE IRONING TEMPERATURE
••
Place the iron on its base (9).
••
Insert the power plug into an electrical socket.
••
Press and hold the control button (11) to switch the
iron on.
••
Press the control button (11) sequentially and set
the desired ironing temperature: «МАХ», «•••»,
«••», «•», «all Textile» (depending on the type
of fabric).
••
The indicator of the selected mode and the heating
indicator (7) will be flashing on the LED temperature
selection indicator (16).
••
Place the iron on its base (9).
••
Set the continuous steam supply knob (3) to the
position
– the steam supply is off.
••
Insert the power plug into the mains socket.
••
Make sure that there is enough water in the water
tank (10).
••
Press and hold the control button (11) to switch the
iron on.
••
Use the control button (11) to set the desired ironing
temperature «•••» or «МАХ», and the indicator (7)
and the corresponding temperature indicator (16)
will start flashing simultaneously.
••
When the iron soleplate (13) reaches the set tem
perature, the indicator (7) goes out, and the tem
11