Текст страницы
camera properly, and pack the network camera product properly using the packaging materials of
network camera and return it to the supplier for handling in case of any problem.
Note: Non-original packaging materials may cause accidental damage during transportation.
3.2 Installation Methods
3.2.1. HD Network IR Integrated Machine (MINI)
Installation diagram of HD network IR integrated machine
Steps:
1. Mark the positions of holes for mounting camera on the wall using an ink pen.
2. Make holes on the marked positions using an electric drill.
3. Drive the expansion rubber plug into the hole.
4. Fasten the wall mounting bracket on the wall with screws.
5. Take out the camera in the packaging box, and fasten the camera on the universal joint of bracket
with screws.
6. Adjust the universal joint of bracket to a proper position and then tighten the screws.
7. Finally, remove the protective film on the IR anti-reflection plate (some models are provided with
IR anti-reflection plates, please clean the cleaning of the IR anti-reflection plate, to avoid oil stains
and scratches).
Note:
22