Текст страницы
Applying [Slow/Quick Post-Effect (4K Cropping/Editing)]
1
Touch the scene to which you want to apply the function.
≥After touching [NEXT], touch [OK].
2
Touch [SLOW] or [QUICK] to switch the effect to apply to the section to be
set.
[SLOW] :Slow-motion effect
[QUICK] :Quick-motion effect
≥The default setting is [SLOW].
3
Perform playback operations and pause at the start point of the section to be
set.
≥You will find it convenient to use slow playback and frame-by-frame playback. (l 99)
0h00m15s
0h00m15s
0h00m15s
4
Touch
.
≥A confirmation message appears.
Touch [OK] and perform playback operations again.
0h00m20s
0h00m20s
0h00m20s
5
Pause at the end point and touch
.
≥Set so that the section is at least 3 seconds.
≥Colors appear on the slide bar of the set section to
represent the [SLOW] and [QUICK] buttons.
[SLOW] : Blue
[QUICK] : Red
≥To reset the section from the start position, touch
.
6
Touch [ENTER].
≥A preview will start.
≥You can set up to 10 sections. To set multiple sections, touch [OK] and repeat Steps 3 to 5.
≥The slow-motion effect and quick-motion effect cannot be set on overlapping sections.
≥The preview includes content set from the beginning of the scene up until 30 minutes playback
time is reached.
If quick-motion effect has been set, the playback time of the preview will be shorter, and if slow-
motion effect has been set, the playback time will be longer. When saving, the previewed part will
be saved.
≥When effects are set in Steps 4 to 5, the effect can be set with the playback time for the scene
after the 30 minute point, but this is not included in the preview.
≥Sections with the slow-motion effect or quick-motion effect will be images without sound.
≥If sections are set in succession, there will be a section following the first section that is normal
playback for about 0.5 seconds.
- 113 -