Текст страницы
Connecting to a wireless access point
Check if the wireless access point you are using is compatible with WPS
j If the wireless access point is compatible with WPS:
Proceed to the following [WPS Connection]
j If the wireless access point is not compatible with WPS:
“Searching for wireless access points to set up a connection” (l 173)
[WPS Connection]
1
Press Wi-Fi button on this unit.
2
Touch [Wi-Fi Setup].
3
Touch [Wireless Settings].
4
Touch the part with no display of a wireless
access point C.
≥For information on how to delete wireless access points or
change the search order of wireless access points, please
refer to [Wireless Settings] on page 181.
5
Touch [WPS Connection].
A
[Delete]
B
[ENTER]
6
Set the wireless access point to WPS standby mode.
≥For further details, please read the operating instructions for the
wireless access point. (When using a tethering connection, please
read the operating instructions for the smartphone.)
≥A message is displayed when the connection is complete. Touch
[ENTER], and exit [Wireless Settings].
≥A message is displayed when the connection attempt fails. Touch
[ENTER], and set the connection again.
Enter a PIN code to set the Wi-Fi connection
1
Touch [PIN code] in Step 6.
2
Touch the wireless access point to be connected.
≥If you touch [Refresh], you can search for wireless access points again.
≥If you touch
and select a wireless access point, all characters will be displayed. In this
case, touch [ENTER].
3
Enter the PIN code displayed on this unit's screen into the wireless access
point.
≥For further details, please read the operating instructions for the wireless access point. (When
using a tethering connection, please read the operating instructions for the smartphone.)
- 172 -