Текст страницы
Charging the battery
When this unit is purchased, the battery is not charged. Charge the battery fully before
using this unit for the first time.
The AC adaptor is in the standby condition when the mains plug is connected. The primary circuit is
always “live” as long as the mains plug is connected to an electrical outlet.
Important:
≥Do not use the AC adaptor/USB cable with any other equipment as it is designed only for
this unit.
≥The battery will not be charged if the unit is turned on.
≥It is recommended to charge the battery in a temperature between 10 oC and 30 oC (50 oF
and 86 oF).
(The battery temperature should also be the same.)
A
USB terminal
B
To the AC adaptor
1
Connect the USB cable to the AC adaptor and to the USB terminal of this
unit.
≥Insert the plugs as far as they will go.
2
Insert the AC adaptor into an AC outlet.
≥The status indicator (l 10) will flash red at an interval of approximately 2 seconds (approximately
1 second on, approximately 1 second off), indicating that charging has begun.
It will turn off when the charging is completed.
∫Connecting to the AC outlet
It is possible to use this unit with power supplied from the AC outlet by turning on the unit with the
AC adaptor connected.
Even when you use the AC adaptor for recording images, keep the battery connected.
This allows you to continue the recording even if a power failure occurs or the AC adaptor is
unplugged from the AC outlet by accident.
∫To charge by connecting to other device
It is possible to charge by connecting to other device with the USB cable (supplied).
Please refer to page 215.
- 13 -