Текст страницы
6.2. Input Features
Clicking the Inputs button reveals various input features and controls, making it easy to
change settings directly from your computer without having to reach for the interface.
Any settings that you set in the MiniFuse Control Center application are stored in hardware memory
and will remain active even after closing the application.
For inputs 1 & 2:
Inst switch toggles the high-impedance circuit for the corresponding input. This setting
should be used when plugging instruments with pickups, like guitars and basses, directly
into the interface.
48V switch turns on phantom power for inputs 1 & 2. Phantom power delivers a power
current to a connected microphone and may be required to get a good signal out of certain
types of microphones.
For more information on the Inst and 48V features, please see the Front Panel Features [p.4] section
of this manual.
For inputs 3 & 4:
Trim knob adjusts the input level for the corresponding input.
Link button links the two trim knobs, so that the trim level is the same for both inputs. This is
useful when recording stereo sound sources.
Level Meters provide a high-resolution display of input levels for the corresponding input.
These can be useful when setting the Gain for the input. The meter features a Clip indicator
which lets you know if the input has been overloaded, or "clipped". Once the Clip indicator
has been activated, it will remain lit until you click to deactivate it.
Arturia - User Manual MiniFuse 4 - MiniFuse Control Center
21