Текст страницы
•
VuMeter Clip Reset Time specifies how the red clip indicator resets after clipping
has occured. On the Infinite setting, the clip indicator will remain lit until you click
to turn it off.
•
VuMeter Peak Reset Time determines the behavior of the yellow peak indicator.
The peak indicator can be configured to reset after a certain amount of time, hold
at the highest peak value (Infinite setting), or to reset instantly (None setting)
•
LEDs Intensity allows you to adjust the brightness of the LEDs on the MiniFuse to
suit your preference.
6.3. Output Features
Clicking the Outputs button provides access to a flexible mixing and routing environment.
Here you can create custom mixes of various computer and input sources, including direct
monitoring of input signals.
Any settings that you set in the MiniFuse Control Center application are stored in hardware memory
and will remain active even after closing the application. On top of that, even if the MiniFuse 4 is not
plugged into a computer, the parameters you have set into the MFCC are saved.
There are three 3 tabs on the left, corresponding to the 3 pairs of outputs on the MiniFuse 4
- two pairs of physical outputs, and a virtual output pair for loopback recording.
Click on a tab header to view the mix settings associated with the corresponding outputs.
For Outputs 1 & 2 and Outputs 3 & 4 you have two options:
1. Enable the corresponding USB button to output audio from these software channels
directly. For example, channels 1/2 from your DAW will be directly routed to outputs 1/2 on
the MiniFuse.
Arturia - User Manual MiniFuse 4 - MiniFuse Control Center
23