Текст страницы
Protective clothing
DANGER
Risk of fatal injury from cut injuries. Wear suitable pro-
tective clothing when working with the device. Observe
the local regulations for accident prevention.
pose a potential threat to human health and the environ-
ment. However, these components are required for the
correct operation of the appliance. Appliances marked
by this symbol are not allowed to be disposed of togeth-
er with the household rubbish.
Notes on the content materials (REACH)
Current information on content materials can be found
at: www.kaercher.com/REACH
Accessories and spare parts
Only use original accessories and original spare parts.
They ensure that the appliance will run fault-free and
safely.
Information on accessories and spare parts can be
found at www.kaercher.com.
Head protection
When working with the device, wear a suitable safety
helmet that complies with EN 397 and is CE marked.
When working with the device, wear hearing protection
that complies with EN 352-1 and is CE marked.
For protection against flying splinters, wear suitable
safety goggles that comply with EN 166 or are CE
marked. Or wear a helmet visor that complies with EN
1731 and is CE marked.
Protective helmets with hearing protection and a safety
visor are available in specialist shops.
Protective gloves
Wear suitable protective gloves with cut protection
equipment that comply with EN 381-7 and are CE
marked when working with the device.
Scope of delivery
The scope of delivery for the appliance is shown on the
packaging. Check the contents for completeness when
unpacking. If any accessories are missing or in the
event of any shipping damage, please notify your deal-
er.
Symbols on the device
Safety shoes
Wear non-slip safety shoes that meet EN 20345 and are
CE marked when working with the device.
General warning symbol
Read the operating instructions and all
safety instructions before operating the
device for the first time.
Description of the device
The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
See graphics page for illustrations
Illustration A
Wear non-slip, sturdy gloves when work-
ing with the device.
1
Chain
2
Guide rail
3
End stop
Wear non-slip safety shoes when work-
ing with the device.
4
Guide rail pin
5
Bar cover
6
Screw for adjusting the chain tension
Always wear suitable eye protection and
hearing protection when working with the
device.
7
Chain oil tank cap
8
Upper shaft
Do not subject the device to rain or moist
conditions.
9
Twist collar
10 Extension insert
11 Eyelet for carrying belt
10m
Electrical hazard. Keep a minimum dis-
tance of 10 m away from overhead lines
when working with the device.
12 Lower shaft
13 Handle
14 Battery pack trigger
Danger due to flung objects. Keep spec-
tators, especially children and pets, at
least 15 m away from the work area.
15 Type plate
16 Trigger
17 Trigger lockout button
18 Carrying belt
Pull: Quick-release catch
19 Allen key for adjusting the chain tension
Running direction of the chain
20 Bar scabbard
21 Chain oil
22 *Battery Pack Battery Power 18V
English
31