Текст страницы
en Troubleshooting
Requirement: The grease filters have been removed.
→ "Removing the grease filter", Page 7
1. Observe the information regarding the cleaning
agents.
2. Soak the grease filter in hot soapy water.
Note: When cleaning the grease filter in the dish-
washer, light discolouration may occur. This discoloura-
tion has no effect on the performance of the metal
grease filters.
Requirement: The grease filters have been removed.
→ "Removing the grease filter", Page 7
1. Observe the information regarding the cleaning
agents.
2. Place the grease filters loosely into the dishwasher.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from customer service
or the online shop.
3. Use a brush to clean the grease filters.
4. Rinse the grease filters thoroughly.
5. Allow the grease filters to drain.
8.6 Cleaning grease filters in the
dishwasher
Do not clean heavily soiled grease filters with
utensils.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from customer service
or the online shop.
3. Start the dishwasher.
Select a temperature of no more than 70 °C.
4. Allow the grease filters to drain.
The grease filters filter the grease from the cooking va-
pour. Regularly cleaned grease filters guarantee a high
level of grease removal. We recommend cleaning the
grease filters every two months.
8.7 Fitting grease filters
WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.
▶
Clean the grease filters regularly.
ATTENTION!
Falling grease filters may damage the hob below.
▶
Grip below the grease filter with one hand.
1. Fit the grease filters.
2. Fold the grease filters upwards and engage the
ATTENTION!
The grease filters may become damaged if they are
squeezed in the dishwasher.
▶
Do not squeeze the grease filters.
locks.
3. Make sure that the locks engage.
4. Close the filter cover.
Troubleshooting 9 Troubleshooting
9.1 Replacing defective LED lights
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
▶
Defective LED lights may be replaced by the manu-
facturer, their customer service or a qualified techni-
cian (electrician) only.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
→ "Customer Service", Page 9
9.2 Malfunctions
Fault
Cause and troubleshooting
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your room or other appliances are working.
The lighting does not
work.
The LED lamp is defective.
▶
Call the after-sales service.
▶
Defective LED lights may be replaced by the manufacturer, their customer service or a
qualified technician (electrician) only.
8