Текст страницы
EN
Connecting the remote control*
• Within 15 seconds after the cooker hood
connects to power supply, press and hold button
1 for 5 seconds, the indicators light begin
flashing, the cooker hood is in connection mode.
• Press any button on remote control to confirm the
connection. The connection process finished.
• If need to connect again, first clear the previous
connection.
• To clear the connection press and hold button 1
for 5 seconds, the indicators light begin flashing,
the cooker is in disconnection mode.
1
• Then, press and hold button
for 5 seconds
1
again, the previous connection code is cleared.
• The previous code has been cleared, c o o k e r
hood is back to standby mode.
Usage of the remote control
• Touch the button 2 to start the engine. The engine
runs at 1st, lowest speed.
• To increase to 2nd or 3rd speeds, touch the button
2 again.
2
• To decrease the speed, touch the button 3.
5
4
• On the lowest speed touch the button 3 to stop
the engine.
3
• Touch the button 4 to start the timer during the
motor is working. The timer is programmed for 9
minutes.
• The button 5 is used to turn on and off the
extraction hood lighting; independently of the
engine work status. Touch this button to switch
on/ off the lighting.
* - if available
36