Текст страницы
INSTALLATION
4. To keep vibration and noise within minimum level when the dryer is in use, it must
be placed on a firm and level surface.
5. The feet must never be removed.
Level Adjusting
Once in its permanent operating position, check that
the dryer is absolutely level with the aid of a spirit level.
If it is not, adjust the feet by hand or using a tool.
Power Supply Connection
1.Make sure that the voltage of the power supply is the same as the electric specification.
2.Do not connect the dryer with the power connection board, a universal plug or socket,
do not use multi-plug adapters and extension cables.
Note!
• Leave it to stand for 2 hours after transporting. Before first use, please use
the soft fabric to clean the inside drum.
1. Put some clean rags into the drum.
2.Plug the power, press 【On/Off 】.
3. Select the 【Refresh】 Programme, press 【Start/Pause】 button.
4. After finishing this programme, please follow the “Cleaning and Care ”
(refer to page 28) to clean the door filter.
• During drying, the compressor and the water will generate some noise
which is entirely normal.
13