Текст страницы
OPERATION
Start the Remote Control
Rotate the knob randomly to indicate one of the programs, and press [
]
continuously until the remote control icon light up in the knob display, which means it
has entered the remote control state and you can start to control remotely.
Wireless Network Status Light
Slowly flashing
Waiting for connection
Quickly flashing
Connecting
Connected to your wireless router
Ever bright
NOTE
1. Make sure your devices are powered on.
2.Keep your mobile phone close enough to your device when you are connecting your device to the network.
3.Connect your mobile phone to the wireless network at home, and make sure you know the password of the
wireless network.
4.Check if your wireless router supports 2.4 GHz band and turn it on. If you are not sure whether the router supports
2.4 GHz band, please contact the router manufacturer.
5. The device cannot connect to the wireless network that requires authentication, and it usually appears in public
areas such as hotels, restaurants, etc. Please connect to a wireless network that does not require authentication.
6. Turn off the WLAN+ (Android) or WLAN Assistant (iOS) function of your mobile phone when connecting your
device to the network.
7. In the case that your device connected to a wireless network before but it needs to reconnect, please click "+"
on the app Home page, and add your device again by the device category and model according to the instructions
on app.
8. The Max RF Output Power: Bluetooth LE: 8dBm, 2.4GHz Wireless Network: 18dBm. Frequency band of
operation: 2400-2483.5MHz.
27