Текст страницы
2.2
Intel(R) iSCSI Remote Boot
The Intel(R) iSCSI Remote Boot provides hardware-based Ethernet card configurations.
To start the Intel(R) iSCSI Remote Boot and access the main screen:
1.
Turn on the system.
2.
During POST, press <Ctrl+D> when the following screen appears.
Intel(R) iSCSI Remote Boot version 3.0.34
Copyright(c) 2003-2014 Intel Corporation. All rights reserved.
Press ESC key to skip iSCSI boot initialization.
Press <Ctrl-D> to run setup...
3.
From the iSCSI Port Selection screen, use the Up/Down arrow key to select an
Ethernet device to configure and press <Enter>.
Intel(R) iSCSI Remote Boot v3.0.34
iSCSI Port Selection
MAC:00E01803016F Dev:1533 Loc:11:0:0 BOOT:PXE
MAC:00E01803016E Dev:1533 Loc:10:0:0 BOOT:PXE
MAC:00E01803016D Dev:1533 Loc:9:0:0 BOOT:PXE
MAC:00E01803016C Dev:1533 Loc:8:0:0 BOOT:PXE
More below ...
Select iSCSI Boot priority: P=PRIMARY S=SECONDARY D=DISABLED B=BLINK LED
•
Press <P> to set the selected item as the primary boot priority, press <S> to set the
selected item as the secondary boot priority, or press <D> to disable the selected item.
•
Press <B> to blink the LED of the selected item.
4.
From the iSCSI Port Configuration screen, use the Up/Down arrow key to select an
item and press <Enter>.
Intel(R) iSCSI Remote Boot v3.0.34
iSCSI Port Configuration
iSCSI Boot Configuration
iSCSI CHAP Configuration
Discard changes and Exit
Save changes and Exit
Copyright(c) 2003-2014 Intel Corporation. All rights reserved.
ASUS PEI-10G/82599-2S
2-3