Текст страницы
8 Box Camera Installation
●The device is not equipped with lens when it is delivered out of factory and you need to install
lens.
●Do not remove the electrostatic adsorption film on the surface of transparent cover before
installation and debugging are completed, which is to avoid damage during installation.
●Install the lens onto the device in time after unpacking, which is to avoid the device module
being exposed in humid environment for a long time.
●The mounting surface shall be thick enough to sustain at least 3 times of the device weight.
●Install the C/CS adapter ring to the camera if you are using C mount lens.
●The following installation figure is for reference only.
8.1 Lens Installation
8.1.1 Installing Lens Type 1
Procedure
Step 1
Remove the protection cap from the device. Align the lens to the lens position of the
device (Install the C/CS adapter ring to the device if you are using C mount lens). Turn
clockwise to secure the lens firmly.
Step 2
Insert the socket of the lens cable into the auto iris lens connector on the side panel of the
device. Skip this step if you are using auto iris lens.
Step 3
Fasten the screw near the focusing ring, and then turn anti-clockwise to move the
focusing ring out to focus manually until you get clear video.
Step 4
After you completed focusing, fix the screw near the focusing ring firmly.
Step 5
Fasten the focusing ring.
Figure 8-1 Lens installation (1)
25