Текст страницы
8.1.2 Installing Lens Type 2
Background Information
●1: Red sign.
●2: Lens-dismounting button.
Figure 8-2 Front panel
Procedure
Step 1
Remove the protection cover on the device lens, align the red sign of the lens with the
red sign ① on the device, rotate the buckle clockwise until the lens-dismounting button
② bounces upward, and then the lens is installed.
Step 2
Loosen the screw on the focusing ring, rotate the focusing ring outward to focus
manually until you get clear video. Skip this step if you are using lens that supports auto
focusing.
●1: Screw.
●2: Focusing ring.
Figure 8-3 Lens installation (2)
Step 3
After focusing, tighten the screw on the focusing ring and fix the focusing ring.
To dismount the lens, press lens-dismounting button ②, rotate the lens anticlockwise,
and release the bucket.
8.2 I/O Port Installation
26