Текст страницы
3. Pairing
The transmitter(s) and receiver are paired by default. If they are
disconnected, please follow the below steps:
① To make the transmitter(s) enter the pairing state, press and hold its
power button for 5 seconds in shutdown mode until its status indicator
blinks blue rapidly.
② Then, insert the included pairing pin into the small pinhole on the
USB-C or Lightning receiver and press once. The receiver will enter
pairing mode and its indicator will blink blue quickly.
③ Transmitter(s) and receiver will be successfully paired within 10
seconds. Their status indicators glow static blue.
4. Launch a video or audio recording app. Then, select the external
microphone, if applicable (app dependent).
5. It is recommended to record a sample and play it back to check if the
audio level is acceptable before recording.
6. To improve the recording effect in a noisy environment, it is
recommended that you press the NR button on the transmitter(s) to
enable noise cancellation.
7. Slide toward on the receiver to enable the phone's speaker.
Sound can be played directly without unplugging the receiver.