Текст страницы
3. Pairing
The transmitter(s) and receiver are paired by default. If they are
disconnected, please follow the below steps:
① To make the transmitter(s) and receiver enter the pairing state, press
and hold their power buttons for 5 seconds in shutdown mode until
their status indicators blink blue rapidly.
② Transmitter(s) and receiver will be successfully paired within 10
seconds. Their status indicators glow static blue.
4. It is recommended to record a sample and play it back to check if the
audio level is acceptable before recording.
5. To improve the recording effect in a noisy environment, it is
recommended that you press the button on the transmitter(s) to
enable noise cancellation.
NOTE:
• If you use the receiver with more than one transmitter, you will need to
set up the receiver örst and then pair the transmitters with it in turn.
• Due to 2.4 GHz wireless frequency, signal can be easily attenuated.
Please try to avoid obstacles, such as walls and buildings, and avoid
close proximity to devices with 2.4 GHz signal, such as high-power Wi-Fi
antennas, radios, etc.