Текст страницы
2. Pull the plastic component, attached on
5. (B) type hinge is available in soft closing
EN
door types.
RU
the upper section of the front door, to-
wards yourself by simultaneously push-
ing on the pressure points on both sides
of the component and remove it.
6. (C) type hinge is available in soft open-
ing/closing door types.
7. Get the oven door to a half-open posi-
tion.
3. As shown in the figure, gently lift the in-
nermost glass (1) towards “A” and then,
remove it by pulling towards “B”.
8. Pull the removed door upwards to re-
lease it from the right and left hinges
and remove it.
To reattach the door, the proced-
ures applied when removing it must
be repeated from the end to the be-
ginning, respectively. When in-
stalling the door, be sure to close
the clips on the hinge socket.
1
Innermost glass
2*
Inner glass (it may
not be available for
your product)
7.7 Removing the Inner Glass of The
4. If your product has an inner glass (2), re-
peat the same process to detach it (2).
Oven Door
5. The first step of regrouping the door is
Inner glass of the product's front door may
be removed for cleaning.
1. Open the oven door.
to reassemble the inner glass (2). Place
the bevelled edge of the glass to meet
the bevelled edge of the plastic slot. (If
EN / 39