Текст страницы
Installation Diagram of HD Network IR Integrated Machine (MINI) -V2.0
Steps:
1. Unscrew the top screw and remove the camera bracket. Unscrew the back cover of camera
according to the mark, unscrew the waterproof lock on the back cover, and take out the rubber rod.
2. Paste the positioning stickers (accessories) on the wall where the camera needs to be installed, drill
holes according to hole position B, and then drive the expansion tube (accessory) into the hole. Hole
position A is the outlet hole. If necessary, drill holes according to the hole position. Pass the network
cable through the camera bracket, and then fasten the bracket on the wall with 3 self-tapping screws
(accessories). Pass the network cable through the waterproof lock and the back cover of camera.
3. Equip the network cable that has passed through the wire lock with RJ-45 terminal and power
terminal.
If the camera is powered by means of POE, the wiring method of RJ-45 is as follows:
POE power supply-wire sequence diagram
If the camera is powered by means of non-POE, the wiring method of RJ-45 is as follows:
24