Инструкция IP-камера Tiandy TC-C35US

3.2.9. HD Network Special-shaped Safe IR Dome Camera

Installation Diagram of HD Network Special-shaped Safe IR Dome Camera

Steps:

1. Make a hole at the mounting position according to the dimensional drawing, and drive the

expansion rubber plug into the hole.

2. Take out the camera in the packaging box, and remove the dome cover; and then fasten the dome

to the ceiling using mounting screws.

3. Loosen the adjusting screw, adjust the camera lens to an appropriate angle, and then re-fasten the

adjusting screw.

4. Align the dome cover with the mounting position of the base, press down the dome cover and

fasten it with screws.

5. Finally, remove the protective film on the dome cover (please protect the transparent cover of

dome, to avoid oil stains and scratches).

Note: The mounting surface of camera must have sufficient bearing capacity.

35