Инструкция IP-камера Tiandy TC-C35US

(1) Brackets must be purchased separately.

(2) The mounting hole of camera is 5.5mm deep. Do not use excessively long screws.

(3) The mounting surface of camera must have sufficient bearing capacity.

3.2.2. HD Network IR Integrated Machine (MINI)

Installation Diagram of HD Network IR Integrated Machine (MINI) -V1.0

Steps:

1. Mark the positions of holes for mounting camera on the wall using an ink pen.

2. Make holes on the marked positions using an electric drill.

3. Drive the expansion rubber plug into the hole that has just been made.

4. Take out the camera in the packaging box and fasten the wall mounting bracket on the wall with 3

screws.

5. Adjust the universal joint of bracket to the proper position.

Note: The mounting surface of camera must have sufficient bearing capacity.

23