Инструкция компьютерное кресло Evolution LX 1

LX x STOPPED HD 1 - ->SPEED= 100

EVOLUTION CODERS
P
h
RED MESSAGE STORE
EVOLU

PART 2: OPERATION PROCEDURES
OVERVIEW
CONTROLLER AND LCD
The
keypad
on
the
print
station, pictured here, contains
64 keys. The LCD will display
various messages to assist in
programming on the upper half
of the display. The lower half
of the display will show the
actual
message
in
a
WYSIWYG (What You See Is
What You Get) format.
The system operates is 3 basic
modes. They are: PRINTING,
STOPPED,
and
MESSAGE
ENTRY Mode. In PRINTING
Mode the majority of the keys
on the keypad are disabled to
avoid
inadvertent
changes.
When in PRINTING Mode the
Top line of the LCD will display
PRINTING.
The STOPPED Mode is used
to change the functions of the
printer.
When
in
the
STOPPED Mode the display
will show STOPPED on the top
line.
The Message Entry Mode is
used to create or modify
printable codes, when in this
mode the top line of the display
will show MESSAGE ENTRY.
The 4 keys on the second row
are the function keys F1
through F4. They each consist
of submenus for modifying
various printer functions. Their
specific menus are detailed
later in this section.
The next two rows of keys with
icon legends directly control
specific
parameters
of
the
printer as follows.

1
EVOLUTION LX SYSTEM MANUAL Issue 1.0 5 DEC 2009