Инструкция компьютерное кресло Evolution LX 1

INSTALLATION AND OPERATION MANUAL
PART 1: INSTALLATION PROCEDURES
INSTALLING THE EVOLUTION LX PRINTING SYSTEM
Caution should be taken while installing the EVOLUTION LX printing system on
your equipment. Digital Design Inc. has taken every precaution to ensure a safe
and accurate instruction set to guide the installer through the installation process.
Follow the operational guidelines in the installation procedures.
Various OPTION PACKAGES (OP) are available and are referenced throughout
this manual.
VERIFY THAT YOUR EQUIPMENT IS IN PROPER OPERATING
CONDITION.
LOCATE A CONVENIENT POSITION ON YOUR EQUIPMENT.
EVOLUTION
LX
REQUIRES
4-1/2"
OF
SPACE
ON
THE
PRODUCTION LINE.
FOLLOW THE INSTALLATION PROCEDURES.
READ CAREFULLY ALL INSTALLATION PROCEDURES BEFORE
PROCEEDING.
INSTALL THE PRINTING SYSTEM ON YOUR EQUIPMENT.
THERE IS NO EXTRA HARDWARE REQUIRED OTHER THAN
THAT SUPPLIED IN THE INSTALLATION KIT.
MOUNTING ON PRODUCTION LINE
Locate the supplied mounting template
and affix in a convenient location on the
production line. Spot and drill both
mounting holes for a 5/16” bolt. NOTE:
the user may also thread the side of the
conveyor using a 5/16” tap.
Fasten the mounting bracket to the
conveyor using the supplied mounting
hardware and ensure that the supplied
ground strap is located securely beneath
either of the two mounting bolts, and that
conductivity to earth ground is less than 1 ohm. This ensures a proper path for
static discharge, should the need arise.

1
EVOLUTION LX SYSTEM MANUAL Issue 1.0 5 DEC 2009