Инструкция компьютерное кресло Evolution LX 1

SEQUENCE NUMBER LOT COUNTER SETUP AND SELECTION Sequence number format is programmable in the STOPPED Mode by pressing the

SEQ. NUMBER 1= COUNT UP 2= COUNT DOWN

CLEAR SEQ# FIELD YES OR NO Y/N

COUNTER LIMIT 000000000 ANY CHANGES Y/N

COUNTER LIMIT ANY CHANGES Y/N ENTER #000000000

COUNTER LIMIT ANY CHANGES Y/N ENTER #000005000

LOT COUNTER 1=ENABLE 2=DISABLE

CLEAR LOT# FIELD YES OR NO Y/N

key. The
counter may be set to count either up or down by
selecting number 1 or 2. Pressing enter advances
the user to the next menu prompt.
Clearing the sequence field resets the counter to
their initial settings.
The next prompt allows for changes in the
sequence limit field. Selecting Y allows the user to
enter the desired maximum (minimum for down
count) count. Digits are entered via the keyboard
right justified. As an example to set a maximum
count of 5000 enter 5000. Pressing the DEL key
allows for re-entry while pressing the ENTER key
returns the user to the LOT COUNTER menu.
If a LOT style counter is desired then enable the
lot counter by selecting option 1.
Selecting ENABLE prompts the user to clear the
lot counter to a reset condition.
The user now has the option of setting the upper
limit of the lot counter by entering Y.

UPPER LIMIT ANY CHANGES Y/N

29
EVOLUTION LX SYSTEM MANUAL Issue 1.0 5 DEC 2009