Инструкция компьютерное кресло Evolution LX 1

Barcode fields may be entered by pressing the

MESSAGE ENTRY - - - - FONT- 1 LINE CODE 128C

key while in the MESSAGE
ENTRY mode.
NOTE: THIS FEATURE IS ONLY AVAILABLE
IN EV LX 2
The barcode insignia is indicated following the
font style and the code type is displayed on the
third line of the display. When the barcode entry
is completed press the

key to end the
barcode field entry. The software checks that the data entered is valid according
to the barcode type selected. If the barcode entered is valid the system re-
displays the barcode with a series of lines overlaying the barcode field. Barcode
fields may contain ANY VARIABLE FIELDS if the specified code permits such a
function. Codes therefore may contain Alpha and Numeric characters, code
dependent.
The barcode types are selected from the STOPPED screen and press the

key,
and select menu option 4.
Entering a sequence number within a barcode requires a specific sequence of
operations that must be adhered to:
1. ENTER THE BARCODE FIELD BY PRESSING THE

key.
2. ENTER ANY CHARACTERS REQUIRED PRIOR TO SEQUENCE
NUMBER

3. PRESS THE SEQUENCE NUMBER KEY

TO BEGIN THE FIELD
4. ENTER THE APPROPRIATE SEQUENCE NUMBER

5. PRESS THE SEQUENCE NUMBER KEY

TO END THE FIELD
6. ENTER ANY CHARACTERS REQUIRED FOLLOWING THE SEQUENCE
NUMBER
7. EXIT THE BARCODE FIELD BY PRESSING THE

key.
The above sequence will allow the user to imbed a sequence number into the
barcode type selected.
The system contains 8 barcode types:
CODE 39
INTERLEAVED 2of5
CODE 128B and CODE 128C
UPC A and UPC E
EAN 8 and EAN 13
Each barcode type may contain man readable characters, guard bars, and check
characters. All barcode characteristics are programmable and are controlled in
the F1 menu option select #4.
NOTE: REFER TO APPENDIX A – PRODUCING RELIABLE
BARCODES
NOTE: BARCODES ARE A FEATURE OF THE LX 2 SYSTEM
ONLY

33
EVOLUTION LX SYSTEM MANUAL Issue 1.0 5 DEC 2009