Текст страницы
Charging
EN EN Installation
Install the Handle
1. Place the charging base against a wall on level ground and connect it to a power source. Fully
charge the appliance before first use.
2. Place the appliance on the charging base. When the number on the display screen reaches 100,
the battery is fully charged.
Insert the end of the handle vertically into the slot on the top of the appliance as indicated until you
hear a click.
Charging/Low Battery Indicator
• Orange Breathing: Battery level ≤ 20% (charging)
• Green Breathing: Battery level > 20% (charging)
• Solid Green: Full charged
2
Click
1
Note:
• If there is no operation within 10 minutes of being fully charged, the appliance will enter sleep
mode. Please restart the appliance when you need to use it again.
Note: To disassemble, extend a hard object into the hole of the appliance as indicated to press
the contacts and pull the handle upward at the same time.
• To prolong its life, the battery will automatically cool down (for approximately 1 hour) before
recharging after the product has been running continuously for a long time. (cooling time is
about 1 hour).
7
8