Текст страницы
Care & Maintenance
EN EN How to Use
Tips
Self-Cleaning Mode
• Turn off the appliance before maintenance. Be careful not to accidentally press the power
button.
1. After cleaning, promptly return the appliance to the base and ensure the clean water tank is
sufficiently filled.
• Replace parts if needed. The parts must be replaced by those available from the manufacturer
or its service agent.
• If the appliance is unused for an extended period, fully charge it, disconnect the power plug,
and store it in a cool, dry place away from direct sunlight. Charge the appliance at least once
every 3 months to prevent the battery from over-discharging.
Clean the Used Water Tank
2. Briefly press
on the top of the handle to start/stop self-cleaning. Switch the drying mode
according to the voice prompts.
3. After self-cleaning is complete, the appliance will automatically enter drying mode; please
promptly empty the used water tank. To exit drying mode, press
.
Drying Mode
1. Pull the tank handle to remove the used
water tank.
1. Press and hold the self-cleaning button
for 3 seconds to activate drying mode.
2. The appliance will be charged once drying is completed.
2. Remove the filter from the tank cover.
Lift the cover and pour out the used
water.
Filter
1
Used Water
Tank Cover
3
2
3. Rinse the tank and tank cover with clean
water. Use the provided cleaning brush to
scrub the inner walls of the tank.
4. Re-install the filter and tank cover. Then,
re-install the used water tank until you hear a
click.
Click
2
1
Note:
• If the filter is dirty, rinse it with clean water and dry it completely before use.
• Replacing the filter every 3 to 6 months is recommended.
Note: Self-cleaning can be enabled only when the appliance is being charged and the battery level
is more than 20%.
11
12