Текст страницы
9
EN
grooves on the meat grinder head body (7) (pic. 5),
tighten the nut (11) (pic. 6).
• Always use the food tray (6) and pusher (5) during the
operation (pic. 7).
ATTENTION!
• Turn the knob (14) clockwise and select the desired
speed, while the speed symbols «P01-----P06» will
be shown on the display (15), the meat grinder will be
switched on and work at the selected speed.
• The continuous operation time of the meat grinder
is 15 minutes, after that the meat grinder will be
automatically switched off and will go into the standby
mode, take a break for at least 15 minutes and
continue operation.
Switching off the meat grinder
• Regardless of the mode in which the meat grinder is
operating, you can switch it off by pressing the on/off
button (16) «
», at the same time the meat grinder
will be switched off, the display (15) will go out, the
button (16) «
» will glow red.
• When installing the blade (9), make sure that the cutting
edges of the blade (9) face the plate (10). If the blade is
installed improperly, it will not grind meat.
• The fine cutting plate (10) can be used for processing
both raw and cooked meat, fish, etc.
• The grate (10) with medium holes can also be used for
processing both raw and cooked meat, fish, etc.
• The grate (10) with large holes can be used for
processing raw meat, fish, vegetables, dried fruits,
cheese, etc.
Reverse function
SWITCHING ON THE MEAT GRINDER
Standby mode
• Plug the power cord into the mains socket, you will hear
a sound signal, the digital symbols «888» will appear
on the display (15), the meat grinder on/off button (16)
«
» will glow red, the meat grinder is in standby mode.
Switching on the meat grinder and selecting the speed
• If a «jam» has formed during operation, use the
reverse function (reverse rotation of the screw) to
eliminate it.
• Turn the knob (14) counterclockwise, the symbols
«P00» will appear on the display (15), hold the knob
(14) for 3 seconds, the meat grinder will be switched
on in reverse mode and will work for 2 seconds, after
that it will go to the standby mode.
Note: when switching to the reverse function from
the operating mode, the meat grinder will stop for 3
seconds, after which the reverse mode will be switched
on.
• Press the on/off button (16) «
», while the backlight
of the button (16) «
» will light up white, the symbols
«P00» will appear on the display (15).
Note: if there are no actions within 30 seconds, the meat
grinder will enter standby mode, the backlight of the meat
grinder on/off button (16) «
» will glow red.