Текст страницы
Chapter 1
Getting Started
Before you begin installing your new ATI FirePro S400 synchronization module, please
make sure you have the proper system requirements and have completed the
required preinstallation tasks as outlined in this chapter.
1.1 System Requirements
Table 1–1 ATI FirePro S400 System Requirements
Hardware
• IntelPentium® 4/Xeon or AMD Athlon™ processor.
• 512 MB of system memory; 1 GB or more for best performance.
• Motherboard with available PCI or PCIe® connection slot and correct chipset driver.
• CD-ROM or DVD-ROM drive for installation software (if necessary).
• 350-watt or greater power supply recommended.
• At least one synchronization-capable AMD FirePro™ workstation card (for example,
AMD FirePro V8750).
Note: Make sure your card is synchronization-capable prior to installation; for a list of
synchronization-capable AMD FirePro workstation cards, see http://ati.amd.com/products/
workstation/synchronization.html.
Operating
System
- Windows Vista® (32- or 64-bit).
- Windows® XP Home or Pro with Service Pack 1 or higher (32- or 64-bit).
- Linux® (32- or 64-bit).
Monitor
• DisplayPort monitor.
• Digital flat-panel (DFP) display or digital CRT display (DVI or HDMI™)
• Component video (HDTV) display.
Note: VGA monitors are not supported for synchronization.
1.2 Recording Serial Numbers
The serial number and part number on the synchronization module are required for
product registration and customer care.
Record these numbers and retain them for future use.
1. Remove the synchronization module from the packaging.
2. Locate the label on the back of the synchronization module.
3. Record the serial number and part number.
© 2009 Advanced Micro Devices, Inc.
ATI FirePro™ S400 Syncronization Module