Текст страницы
2. Ensure your headphones are switched on.
EQ
7. Auxiliary Connection
3. Launch the app, then read and follow the
Use the Treble and Bass sliders to customise the
tone of your headphones.
In addition to Bluetooth, your Px7 S2 can also
connect to audio sources using the supplied 3.5 mm
audio or USB cables.
ENGLISH
instructions pertaining to app notification and
permissions.
Connections
7.1 Connecting with the 3.5 mm Audio Cable
4. The app should detect your headphones
automatically and invite you to set up your
headphones; follow the in-app instructions to
complete the setup process.
The 3.5 mm audio cable enables your Px7 S2 to be
used with a device supporting an analogue output,
such as a conventional headphone socket on
aeroplanes, smartphones or a traditional hi-fi system.
5. If your headphones are not detected
The two most recently connected Bluetooth
devices are shown in the Connections shortcut
buttons. The buttons will appear grey if not currently
connected. Tap the buttons to attempt reconnection.
If only one device is shown, tap ADD DEVICE to
place the headphones into Bluetooth pairing mode
to pair them with a new device.
1. Insert the supplied USB-C to 3.5 mm audio
automatically, navigate to the Settings page
(
icon), tap App product and follow the in-
app instructions.
cable into the headphone’s USB-C socket on
the right earpiece.
8.2 Controlling Your Headphones
2. Insert the other end into the appropriate socket
Tap the CONNECTIONS heading to view more
detailed connection settings, including previously
connected devices (Px7 S2 will remember up to
eight devices).
on your device.
Commonly used features of your headphones are
accessible directly on the app homepage:
3. Your Px7 S2 will automatically disconnect from
any Bluetooth devices.
• Battery status
Once in the Connections page, swipe a device left to
delete a device from the list. Swipe a device right to
make it the preferred device to connect to when the
headphones are switched on.
• Environmental controls (Noise Cancellation,
Pass-Through)
• Device connections (refer to the Connections
section below for further details)
Toggle Auto-connect to last device to prompt the
headphones to connect to the previously connected
device when they are switched on.
Note: Your headphones must have sufficient
charge and be switched on to play audio from an
analogue source device. The volume and play/
pause buttons will not function when you are
using the 3.5 mm interface.
8.2.1 Headphone Settings Page
7.2 Connecting with the USB Cable
Tap PAIR A NEW DEVICE to place the headphones
into Bluetooth pairing mode and pair them with a
new device.
Quick Action Button
The USB connection enables your Px7 S2 to
function as a USB sound output device when
connected to a capable computer.
Other settings can be adjusted from the Settings
page. Tap the
icon at the bottom of the screen
to enter the Settings page, then select your
headphones from the list.
1. Insert one end of the supplied USB-C to
Environmental Controls
The left earpiece of your headphones features a
button that provides quick access to commonly
used functions. Customise the function of this button
from the app.
USB-C cable into the Px7 S2 USB-C socket on
the right earpiece.
Set the desired environmental control from the
following options:
2. Insert the other end into the appropriate socket
• Environmental Controls – each press of the
Quick Action Button cycles through:
on your computer.
• Noise Cancelling On
• Pass-Through On
3. Px7 S2 will automatically disconnect from any
• Noise Cancelling and Pass-Through Off
- Noise Cancelling On
- Pass-Through On
- Noise Cancelling and Pass-Through Off
Bluetooth devices.
• Voice Assistant – press the Quick Action
Button to activate your device’s voice assistant.
4. Find and select your headphones from the
computer’s audio output control panel.
Note: The headphone battery will also charge
when connected to a capable USB port.
8. Bowers & Wilkins Music App
The Bowers & Wilkins Music app is available for free
on iOS and Android devices and provides extended
setup and adjustments to features such as Active
Noise Cancellation, Ambient Pass-Through and EQ
settings. The app also provides further functions
such as device naming, connection management
and headphone software updates.
bowerswilkins.com/downloadapp
8.1 Connecting Your Headphones to the App
To set up your headphones in the app:
Diagram 7
Connecting the 3.5 mm audio cable
1. From your Android or iOS device, download
and install the Bowers & Wilkins Music app.
6