Текст страницы
Using the headphones
By default, the name of the headphones is “ACCENTUM Plus”.
You can individually adjust the name in the Smart Control
app (> 15).
4. From the list of found Bluetooth devices, select “ACCENTUM
Plus”. If necessary, enter the default pin code “0000”.
5. If pairing was successful, you hear the voice prompts “Pairing
successful” and “Connected” one after the other. The LED flashes
white 3x.
1.
2.
ON
5s
3.
4.
ACCENTUM Plus
......
3x
If no connection is established within 2 minutes, pairing mode
is terminated and the headphones switch to standby mode. If
necessary, repeat the steps described above.
Switching the connection to paired Bluetooth devices/“Connection management”
To selectively switch the audio connection to paired Bluetooth
devices using the “Connection management” function, you require
the Smart Control app (> 15).
▷In the Smart Control app, tap “Connection management”.
The list of Bluetooth devices paired with the headphones
appears.
▷From the list, select the paired device to which you want to con
nect the headphones. Make sure that the desired device is
switched on and Bluetooth is activated.
The Bluetooth audio connection between the desired Bluetooth
device and the headphones is established.
The app connection between the device with the Smart Control
app installed and the headphones remains active (only Bluetooth
Low Energy for communication between app and headphones,
the device name is highlighted in bold).
14 | ACCENTUM Plus