Текст страницы
en Cleaning and servicing
¡ You can delay the natural wear by
Using turbo mode
using the following measures:
– Only charge the battery in the
Requirement: The appliance has
been switched on.
→ "Switching on the appliance",
Page 36
temperature range between
0 °C and 45 °C.
– Only store the battery in the tem-
perature range between -20 °C
and 50 °C.
– Do not store the battery for an
▶Press
.
→ Fig. 12
a The status display flashes white.
extended period of time if it is
fully charged or fully discharged.
Vacuuming with accessories
1. Place the required accessory onto
Installing the appliance
1. Place the suction pipe onto the ap-
the suction pipe or the appliance's
connection port.
→ Fig. 13
2. After use, insert the accessory into
pliance's connection port and lock
it in place.
→ Fig. 9
2. Insert the end of the suction pipe
the base station 1.
→ Fig. 14
into the floor nozzle and lock it in
place.
Cleaning and servicing Cleaning and servicing
Dismantling the appliance
1. Press the release button and pull
Cleaning and servicingTo keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Cleaning products
the suction pipe out of the floor
nozzle.
→ Fig. 10
2. Press the release button and pull
Only use suitable cleaning products.
the suction pipe out of the appli-
ance's connection port.
Switching on the appliance
ATTENTION!
Using unsuitable cleaning products
or incorrect cleaning may damage
the appliance.
▶Do not use harsh or abrasive de-
▶Press
.
→ Fig. 11
a The status display lights up white.
tergents.
▶Do not use cleaning products with
Switching off the appliance
a high alcohol content.
▶Do not use hard scouring pads or
▶Press
.
a The status display goes out.
cleaning sponges.
▶Wash sponge cloths thoroughly
before use.
1 Depending on the appliance specifications
36