Текст страницы
to be replaced.
EN
3. When it is dirty, rinse the brush roller
with clean water until it is clean.
Fig. F-16
1. Press down the battery pack release
button and slide the battery pack to the
right, as illustrated, to remove it.
4. Stand the brush roller upright for at least
24 hours until it is fully dry.
2. Install the new battery pack.
Fig. F-17
Fig. F-23
Cleaning the Motorized
Mini-Brush
1. Use a coin as illustrated to rotate the lock
counterclockwise until you hear a click.
Fig. F-18
2. After unlocking the motorized mini-
brush, remove the brush roller, then rinse
and clean it.
Fig. F-19
3. Stand the brush roller upright in a well-
ventilated area for at least 24 hours until it
is fully dry.
Fig. F-20
4. Once the brush roller is dry, reinstall it by
following the disassembly steps in reverse.
Fig. F-21
Cleaning the Spin Mop Head
Flip the mop head and remove the mop
pad. Rinse the mop pad until it is clean,
and thoroughly dry it before re-installing.
Note:
• Before storing the mop head for an
extended period, empty the water tank
and turn the outflow control switch to
OFF.
• Before cleaning, make sure that the
vacuum is powered off.
Fig. F-22
Battery Pack
The vacuum contains a removable
rechargeable lithium-ion battery pack
which has a limited number of recharge
cycles. After extended use, the battery
pack may no longer hold a charge. If this
happens, it means the battery pack has
reached the end of its life cycle and needs
19