Текст страницы
Note:
EN
Suitable for vacuuming cracks, corners of
doors and windows, stairs, and other hard-
to-reach places.
Fig.E-6
• If any rotating part becomes stuck, the
vacuum may shut off automatically.
Remove any trapped foreign objects,
then resume use.
Wall Mount
The vacuum cleaner can be placed on the
wall mount when it is not in use.
Note:
• When the motor becomes overheated,
the vacuum will automatically shut
off. Wait until the battery temperature
returns to normal, then resume use.
• Do not put the vacuum cleaner alone on
the wall mount.
Care & Maintenance
Tips:
• Place it on the wall mount after
connecting it with the extension rod and
the multi-surface brush.
1. Always use genuine parts to keep your
warranty from being void.
Fig. E-7
2. If the filter or nozzle becomes clogged,
Spin Mop Head
1. Install the Mop Pad
the vacuum will stop working shortly
after being turned on. Clear the tube to
restore functionality.
1) Dampen the mop pad and wring out
excess water.
3. If the vacuum is not used for an
2) Align the central hole of the pad with the
fixing screw in the center of the mop pad
holder. Press the mop firmly to ensure that
it is properly attached.
2. Fill with Clean Water
extended period, fully charge it, unplug
its charger, and store it in a cool, low-
humidity environment away from direct
sunlight. To avoid over-discharging the
battery, recharge the vacuum at least
once every three months.
Open the water tank plug and fill the water
tank with clean water. To avoid damage to
the tank, please do not add any chemicals.
Cleaning the Vacuum
3. Start Cleaning.
Wipe the vacuum with a soft dry cloth.
1) Connect the spin mop head to the
extension rod.
Cleaning the Dust Cup, Pre-
Filter, and Cyclone Assembly
2) Press the on/off switch briefly, and the
mop pad holder will start rotating.
Fig. E-8
Note:
• Use only with the mop pad included.
The vacuum's cleaning ability will be
reduced if the dust cup is filled to the
"MAX" mark. To regain performance, empty
the dust cup in a timely manner. Before
emptying the dust cup, make sure the
vacuum is disconnected from the power,
and do not press its power button.
1. Press the dust cup bottom cover release
button, then empty the contents.
• When mopping, the suction power of
vacuum remains unchanged in any
levels.
Fig. F-1
• Dampen the mop pad and wring out
excess water before mopping.
• To avoid any damage, do not step on
the spin mop head or mop pad.
17