Текст страницы
EN EN Routine Maintenance
Routine Maintenance
Parts
To keep the robot in good condition, it is recommended to refer to the accessory usage in the app or the following table for routine maintenance.
Mopping Module
1. Remove the water tank and the mop pad holder.
Part
Maintenance Frequency
Replacement Period
Part
Maintenance Frequency
Replacement Period
3. Pour out the water in the tank. Clean the tank with water only and leave
it to air dry before reinstalling.
Mop pad
After each use
Every 3 to 6 months
Bumper
Main brushes
Every 6 to 12 months
Edge sensor
Side brush
Once every 2 weeks
Omnidirectional wheel
Once every month
Every 3 to 6 months
Dust box's filter
Cliff sensors
/
Signaling area
Bottom of the robot
Dust box
Charging contacts
Note: Do not directly expose the water tank to sunlight.
Clean it as needed
Main wheels
Auto-empty vents
Once every month
/
Water tank
4. If the water flow is slow or unevenly distributed, clean the air hole on the
water inlet lid.
Dust bag
/
Every 2 to 5 months
2. Remove and clean the mop pad with water only, then dry it completely
Laser distance sensor
(LDS)
before reinstalling.
Dock sensors
12
1
11
2
10
3
9
24 hrs
4
8
5
7
6
Note: The replacement frequency will depend on your usage of the robot.
If an exception occurs due to special circumstances, the parts should be
replaced.
2
1
3
15
16