Текст страницы
EN
EN
Preparation Before Use
Connecting with Dreamehome App
Note:
- Remove the protective strips
- Connect to a power outlet and start charging
This product works with the Dreamehome App which can be used to
control your device.
• Only 2.4GHz Wi-Fi is supported.
1. Download the Dreamehome App
• Due to upgrades in the app software, the actual operations may differ
from the directions in this manual. Please follow the instructions based on
the current app version.
Place the base on level ground against the wall and connect it to a power
outlet. Place the robot onto the base to charge. The robot will turn on
automatically and begin charging. It is recommended to fully charge your
robot before first-time use.
> 0.3 m
Scan the QR code on the robot, or search for "Dreamehome" in the app store to
download and install the app.
3. Reset Wi-Fi
Within the Good
Wi-Fi Range
Simultaneously press and hold the
and
buttons until you hear a
voice prompt say, "Waiting for the network configuration." Once the Wi-Fi
indicator is blinking slowly, the Wi-Fi has been successfully reset.
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and
add the device again.
QR Code
> 0.5 m
2. Install the side brush
> 0.5 m
2. Add Device
> 1.5 m
Put away the power cord
into the cord storage slot
Click
Note:
Open the Dreamehome App, tap "
" in the upper right corner, and scan the
QR code above again to add "DreameBot D9 Plus". Please follow the prompts
to finish the Wi-Fi connection.
• Keep the immediate area 1.5 m in front of the base and 0.5 m to its both sides
clear of objects.
• Make sure that no objects might block the signaling area.
Wi-Fi Indicator
About the Auto-Empty Base
· Blinking slowly: To be
connected
· Blinking quickly: Connecting
· On: Connected
It is recommended that the robot set out from the base before cleaning. Do not
move the base while the robot is cleaning. This ensures that the robot returns to
base smoothly.
After the robot completes the cleaning task and automatically returns to the
base, the base will start auto-empty. More settings can be operated on the APP.
Note: Install the side brush until it clicks into place.
8
9